Orange Diamond Textured High Visibility Nitrile Gloves

Powder-Free Nitrile Gloves - The Affordable Choice for consistency, performance and reliability. State-of-the-art manufacturing facilities and formulation ensure a tough durable glove, free of objectionable chemical odours and harsh, irritating deodorants. Stronger than either comparable latex or PVC/vinyl gloves, provides excellent protection from a wide range of chemicals for splash or intermittent contact. Textured palms and fingers offer exceptional wet or dry grip. Available in 9'' and 12'' lengths, in 4 hand sizes from small to large

• Non Sterile
• Ambidextrous Application
• Rigorous Industrial
• Agricultural
• Food-handling
• General Purpose

Available in:

• GNPFO-M       Medium
• GNPFO-L         Large
• GNPFO-XL       X-Large
• GNPEO-XXL    XX-Large

• Ambidextrous Unbreakable Ultimate Grip Raised Textured Nitrile Gloves available in Sizes S, M, L, XL and XXL
• Designed for Flip in Donning and Easy Doffing (Doffing Aided Gloves)
• High Visibility gloves.
• Available in length up to 300 mm.
• Fully Diamond textured on the entire surface of the glove.
• 100% nitrile - no natural latex proteins
• Powder Free
• More puncture resistant than either latex or vinyl gloves
• Low levels of chemical accelerators
• Low odour
• Better dissipate electrostatic charge
• Nitrile polymers can be significantly tailored to achieve any needs
• Nitrile can be tailored to achieve a desired performance
• Especially resistant to hydrocarbon oils, fats and solvents
• Enhanced rubber like feel

Additional Qualities:

• Protein Free: Zero Protein Content.
• Skin Friendly: Gloves are Multiple times washed during production process with Hot and Cold Water for excellent donning comfort and no skin irritation or sensitization even during prolonged and extensive donning.
• Weather Tested: The heavy duty Raised Textured is Block tested under extreme weather conditions viz 0 0C 24 hours continuous exposure and subjected to heat @1000C for 24 hours.
• EN-455 -IV: Shelf life of 5 years without any substantial negation in Physical

Properties.

• Nitrile Orange Textured gloves are dipped thin for dexterity and comfort and do not afford the high degree of chemical protection that is found in heavier weight gloves that are dipped specifically for chemical use. These gloves do afford a degree of chemical "splash" protection and the above recommendations are meant to be used only as a guide when selecting gloves for any chemical contact use

Certification:

• Compliance with the International Standards:
• EN-374-3:2003 (EJK) Compliant
• Chemical Resistance : Designed with High Resistanceto Permeation and Safe for use with many Chemicals:
• 4% Chlorhexidine=Level 6
• 10% Formalin=Level 6
• 1% Gluteraldehyde=Level 6
• 4% Gluteraldehyde=Level 6
• 33% Formaldehyde=Level 6
• 3% Hydrogen Peroxie=Level 6
• FDA 21 CFR 177: 2600 (e) & (f) Compliant:
• Safe for use with Food Contact
• ASTM D 5151 & EN 374-2:2003 (Freedom From Pin Holes) :
• Produced under stringent quality gears to yield high AQL 1.5
• ASTM D 5151 & EN 374-2:2003 (Air Leak Test Pass at
• 2.85 kPa pressure):
• High elasticity and Low modulus gloves prevent pin hole formation during the production process.
• Physical properties : Compliant with ASTM D 6319 and EN 455- II-
• Produced with best grade raw material for extra ordinary physical properties with:
• Tensile Strength (After Aging)=26 MPA
• Ultimate Elongation (After Aging)=400%
• Physical Features ( Thickness, Palm Width and Length):
• Designed & Developed in compliance with ASTM D 3767& EN 420:2003 + A1:2003 and ISO 11193.
• pH : Compliant with EN 420: 2003 + A1:2009 Clause 4.3.2
• Dexterity: Compliant with the requirements as per EN 420: 2003 + A1:2009.
• Mechanical Features: Tested for EN 388: 2003.
• We have 510k approvals from US FDA to sell all our products
• We are a ISO 9001:2000, ISO 13845, and TGA certified factory.